Текст книги "A Call for armed insurrection (СИ)"

Автор книги: Марат Нигматулин

сообщить о нарушении

Текущая страница: 21 (всего у книги 23 страниц)

 

This thing is made elementary. First you need to take the clay. This clay needs to be slightly soaked in water. Then you have to make a mold out of it for the brass knuckles. The shape must then be properly dried. The clay is dried this way. The manufactured form should be wrapped in a dry cotton cloth. After it should be covered with plastic. Then put in a dark and warm place. Cotton cloth should be regularly changed,because the old will get wet. And wet quickly. In this state of clay should lie for three to five days. Only then will it dry completely. After drying should be roasted. It is carried out so. The form is simply put on an open fire. It needs to be held for at least thirty minutes. Then you clean the form. When the shape cools down, you take a tin or lead. Pieces of one of these metals are folded into a saucepan. The pot itself is on fire. When the metal melts, it must be poured in shape. Now all you have to do is wait for the metal to harden. When it does, the brass knuckles will be ready.

 

It's used to be very simple. First you're gonna run your fingers into the hole. Then you squeeze your fingers in your fist. The handle, as I said, is being rebounded in the back of the palm. You only have to strike a punch. To beat the enemy under such conditions must be first and foremost in the head. It's gonna be more efficient.

 

You can still do that. Take a little poppet. It should be in range ranging from thirty to fifty centimeters. This is a Polish need to score as many nails as possible. Nails should take the same ones used to be used to spike trees. Each of them should be equal to fifteen-twenty centimeters. Such nails should be slaughtered by many. They have to stick out of your chum in all directions. One bunch is necessarily hammered into the end of a wooden log. When this nail is hammered by one-third of it's length, it needs to break the hat. This is done with pliers. After it is necessary to bend the designated nail so that it's end, where there used to be a hat, – also snare into the tree. Then this end is hammered into the thickness of wood. It turns out a kind of loop, located on one of the ends of the log. In this loop it is necessary to put a rope. The latter should be thirty centimeters long. Now you need to takea long and thick enough pole. In length it must have one and a half to two meters. In one of the ends of this pole is hammered the same loop as in one of the ends of the nailed log. Now the ropethat is attached to the chum should be put also in the named loop on the edge of the pole. Thus, the pole and the pole bind with each other. So you have a real battle chain! German peasants used these weapons in the time of Munzer! 

 

This thing is used very simply. You first unwind log-in with all your might, and then hit this log enemy on the head. 

 

We can still swing the gaseigh. It represents a shifting metal Hyr on the rope. It's done the last thing. First you make a clay form for the distinction of the most schivelic geeks. She's doing it. First you get down from clay form for one half Shiri, then form for another half. After these two forms, they are connected between themselves. From the top of the forms is a small hole. Through him, metal will be pouring inside of shape. Also keep in mind that the gear should have a special loop, which will then be a rope. Then you melt tin or lead. Liquid metal is pouring into shape. When he hardens, the gear has been removed from the form. The special loop is a fat and long long cord. In length it must be half a or two metres.

 

Slungshot is used exactly as much as the cep. You are exactly the same way to unwrap the metal geek first, and then you strike the enemy of this geek. Of course, I'm going to head over the head.

 

We can still make bolas. He's being elementary. Take a pretty heavy lug. Then you're gonna put a lasting cord in her. The latter should be equal to one-two metres. All the weapons are ready!

 

It applies the same as it did.

 

And yes, you can use the usual chain. She's not doing anything. Just take a steel chain long into one meter. All right, you can use it!

 

The weapon is used in the same manner as the samples described previously. So the chain gets unwrapped and then strikes her head.

  

The melee weapon is over! 

 

Let's say a few words about the gems now.

 

The simplest self-sacrifice is done so. To begin with, a steel tube is taken. The tube should not be too wide. If it's diameter is too large, the pressure in it will be weak. This means that the range of the shot will be small. However, it is also impossible to take a very narrow blank. The tube may be too narrow to break during a shot. If you want to get a short-barrel weapon, – you need to pick up a short phone. It'slength should be fifteen to twenty centimeters. If you need to make a long-barreled weapon, then the tube will need a large. It's length in this case can range from eighty centimeters to one meter. 

 

When the tube is selected, you can get down to business. One end of the blank is flattened in the grip, and then bent to the side with the help of pliers. Next, a small hole is drilled near the designated bend. 

 

After you need to cut out of wood a gun handle or butt. One of two. The handle is cut for a short-barreled weapon. Butt, respectively, – for the long-barreled. 

 

When the above parts are made, a steel tube is attached to them. It is usually fixed by metal wire. Now the self-made is ready! 

 

This is, of course, the simplest system. The simplest of those that exist at the moment. In general, the world produces and multi-charge self-pales, and even self-palas with an automatic recharge system. 

 

But, as you know, it is very, very difficult to manufacture such weapons. 

 

Of course, I could tell you about it. Moreover, I'll tell you more about it. But not now. And here's why. 

 

First of all, it takes a long time to talk about it.  If I start, it will take many hours. There's no way to shove it into one lecture. In a good way for such a topic you need a whole separate course. 

 

Secondly, there is not much to tell. You have to show it! You can't do without practical lessons. No, I could, of course, tell you something like that right now. Well, for example, how to weld a gas reloading system. But frankly, I doubt you'll understand any of my explanations. However, don't think about it. It has nothing to do with your mental abilities. It's just the case. Until you try to collect all this, do not really understand anything. 

 

Thirdly, it is actually a young fighter's course. So I have to teach you basics right now. The basics of guerrilla science, so to speak. And the manufacture of homemade automatics is not a basket. This is for more advanced comrades.

 

Time comes, we and for these comrades are organizing a special course. Advanced course. So, with lectures, practical lessons, the blueprints... But it will be later. Now get back to business!

 

So, you've made a dump.

 

Now you need a bullet. These are made in the last to read. For starters, take a metal ladle. There's no one, no, it s a tin can. Now in the bottom of the elected packaging you run a minor hole. Put in the contained dishes of lead or tin. Then you'll scatter the bonfire. Wait for the moment the flames are blown properly. When this happens, put your improvise smelter in fire. Very soon, the metal will melt. The large droplets of melted metal will start falling into the fire. When it happens, take a cold water bonnet. Now make the drops of metal fall into this very cold water. They'll be instantly freezing. As a result, the bottom of the Hellcats will be settled by large metal balls. That's the homemade bullets.

 

I'll point out that when the bullet is fired, the bullet is softened. It's due to the heat of the temperature in the barrel. So when this remarkable shell is a hostile, the last thing is not good. Naturally, the body is blindfolded at the opulpas of liquid metal. This drop gets to him in the flesh, it gets flushed, and then it gets cold. So, actually, the wounds of the homemade bullets are pretty heavy. Treat them is quite difficult.

 

Now a few words about how the self-described Samoan is used. For starters, take some gunpowder. Put that gunpowder in the duo. After you take the same little piece of paper. It'll be a dust. It's being drawn into a barrel to make gunpowder undumped. The dust of the dust will place the bullet. Now take the gas lighter with the long nose. Take her to the little hellhole you did in the barrel of the dump. Now turn on the lighter. Once you do, the powder is detonating. The bullet with the whistle is out of the gun.

 

Don't forget that gunpowder can t be played anywhere. If he's gonna be too much, the gun gonna explode. Remember, therefore, the proportion: the mass of gunpowder shall be twice the size of the bullet bullet. If the bullet, for example, weighs two grams, you need one gram of gunpowder.

 

And yes, before we went to get a hit on the war, try to try your weapons in the lab. It's very simple. First you put a dump on lafette. Then charge it. Next you connect the fuse to the hole you drilled for the charge of the charge. After the fuse, it's burning. A man in this must leave this construction.

 

If the shot goes well, the dudes can be used. I'll remind you that the lucky one is a shot that the gun didn t break.

 

Don't forget that the gun is prone to wear. A few dozen shots, and he needs to be changed. Otherwise, it could happen tragedy.

 

Okay, this is over.

 

Let's talk about the hunting bow now. You can make it like that. First, wait for winter. Choose a clear frosty day. The temperature outside the window should be somewhere ten to fifteen degrees below zero. When such a day comes, go boldly into the woods. Find a good tree there. Oaks, maples and birch trees are the most suitable for our purposes. When you find a suitable tree, cut off one branch. This last one should be ten to twelve centimeters in diameter. It should be two metres long. And yes, the cbuds and growths on this branch should be as few as possible. 

 

Remember that you can't limit yourself to a single piece. This is due to the fact that many branches during drying are covered with cracks. And in general in this case it is incredibly easy to ruin the whole process with some small thing. Therefore, initially harvest not one, but at least five or six branches. 

 

When the branch is cut off, the place of the log cabin should be smeared with varnish. After that, the blank should be taken to a warm and dry place. There it should be put upright. So the branch should stand for two or three months. The wood should dry. 

 

When it's dry, take the axe. It is necessary to deprive the branch of all. Then you will need to boil water. You will need to hold this churban over the boiling hollow for ten to fifteen minutes. Then put the churban with some load. Leave him in that position for two weeks. Let it dry completely. The bark then has to fall off itself. If it doesn't happen, cut off the bark with a knife. Naked wood needs to be waxed. 

 

Let's get back to business. 

 

Your existing churban should be cut in half. And it should be cut along, not across. As a result, the place of one cylindrical churban, – you will get two half-cylinder churbans. Both named churbans must be hung over the floor. In this position, they should be held for a week or two. 

 

After you need to take the shirt. With it, you have to give your semi-cylindricalsicans the shape of the bows. Here's what you're going to notice. When you decide your churban, – necessarily near both of his ends small notches. These notches will be fastened with string. 

 

Be careful about the bitches! In places where there are cursed bitches, the tree can go cracked. The bitches therefore need to be removed with a sharp knife. Those places where there were bitches – you should carefully wipe first with file, and then sandpaper. 

 

Now you need to bend your chumps so that they finally turn into weapons. Here's how it works. You take one churban and gently bend it. 

 

Next, you'll have to focus on the structure of the wood. The tree, as you know, has so-called annual rings. Now look at the end of your blank. You will see that the tree is dark in the core. At the edges, on the contrary, – light. So when you make a bow, remember one thing. 

 

The side of the bow, which is turned to the arrow during shooting, shouldconsist of darkened old wood. The flip side, when shooting aimed at the enemy, on the contrary, should consist of young wood fibers. 

 

When the blank is bent, you need to take the string. It's being put on the same notches you've done near the ends of the blank. Now you need to leave the bow in a designated state for a while. Then you take a sharp knife. The notches are made at the ends again. This time these last should be placed a little closer to the middle of the bow. Now you're pulling the string on them. Then you wait for a while again. Then again cut through the notches, again pull on them string and so on. All this continues until the hunting bow acquires the desired bend. 

 

As for the string, it is usually made of a strong cord. It will also be contained by a fisherman's forester.